The road sweeper with exceptional performance and low water and fuel consumption.
High productivity road sweeper
The DULEVO D3 road sweepers have a mechanical sweeping system, a vacuum sweeping system and a real filter. The high-efficiency filter guarantees constant efficiency in all working conditions.
Water saving
The water is only used to remove the dust from the brushes. This means that significant water savings can be made. The DULEVO D3 road sweeper can also work without water.
Road sweepers for high productivity
Brush speeds are twice as fast as most other equipment on the market and working widths are large.
The time required for refilling the water is reduced or eliminated by the design of the equipment. These features help to improve the productivity of your operators.
Technology 4.0 and innovations
Communication between the various components is carried out via CAN Bus technology. The hardware is also equipped with passive and active interfaces.
The operator at the heart of the DULEVO D3 road sweeper's design
The equipment is designed to help the operator, and is comfortable and easy to handle.
Technical characteristics of the DULEVO D3 road sweeper
Front brush
The front brush is positioned by means of a hydraulic system. The operator controls the front brush directly from the driver's seat using the joystick.
The larger diameter of the front broom allows large working aisles.
Complies with the Euro 6 C emission standard. In addition, the Mann-Hummel engine filter protects the engine with its three-stage filtration thanks to its vortex pre-filter, primary and secondary cartridges.
External tank and water circuit
The external tank is made of stainless steel and is equipped with a filling pipe. A level indicator is present on the side of the tank. This way the water level can be easily seen.
The nozzles can be adjusted horizontally and vertically. In addition, filters prevent dirt from clogging the nozzles to keep them working properly.
DULEVO's patented waste conveyor, with the external structure of the conveyor made of high strength steel. The high flow water cleaning system allows the cleaning of the belts and the fins. This allows the removal of accumulated waste and optimises the efficiency of the sweeping.
Waste container
The waste container is made of AISI 304 stainless steel. A hydraulically opening hatch allows for inspection. A wireless remote control also allows operators to perform operations from outside the cab.
Dust filter and certification of the DULEVO D3 road sweeper
A hydromechanical system allows the filter to be cleaned (vibration + water). The operator triggers this operation directly from the cabin using a special control.
The filters of the DULEVO D3 road sweeper are En15429-3 certified. This means that fine dust does not pass into the cab. Gore filters can also be fitted to increase performance..